How To Assemble the PetSafe® Seascape Pet Fountain
Important Information
Before using the fountain for the first time, thoroughly wash all parts. For detailed instructions, visit our article How To Disassemble & Clean My PetSafe® Seascape Pet Fountain.
Disassemble and clean all the components of the pump. For detailed instructions, visit our article How To Take Apart My PetSafe® Seascape Pet Fountain Pump for Cleaning.
Thread the pump cord through the top of the bowl stem.
Slide the foam filter on the pump from underneath it. The curved side of the filter goes in front of the blue faceplate on the pump and the pump cord comes out above the filter. Place the pump in the bottom of the bowl.
Place the rubber cap into the stem and fold the excess over the top of the stem.
Rinse the carbon filter thoroughly under cold water to remove any loose carbon dust. Insert the filter into the filter housing with the larger side facing down. Then close the filter housing.
Insert the filter housing into the top of the pump. Align the circular piece on the filter housing with the circle on the top of the pump. The flat side of the filter housing will rest against the stem of the bowl. Press down firmly to ensure the pump securely suctions to the fountain base.
Place the tower over the filter housing. Press down so that the silicone gasket seals. Fill the fountain bowl more than halfway full with water.
Place the fountain in your desired location. Make sure the electrical power cord, the adaptor, and your hands are completely dry. Connect the in-line plug and make sure no silver is showing, then plug the adaptor into a standard electrical wall outlet.