My 60 oz and 90 oz PetSafe® Outlast™ Fountain is Blinking Red
Important Information
If your fountain has a blinking red light, there is an issue with the fountain. Follow the troubleshooting steps below to resolve the issue.
For more information on the different status lights and their meaning, visit our article What Does the Status Light Indicate on My PetSafe® Outlast™ Fountain?
With the tray in place, fill the bowl slowly with water to the ledge where the white bowl meets the clear top. Only fill from the bowl, not the tower, to avoid motor damage. Do not overfill.
Ensure the bowl is properly seated on the fountain base. Clear any debris under the bowl that may be preventing this. There should be no gaps between the bowl and the fountain base.
Ensure the spout and cone are properly seated. Press firmly down on the spout. Lift and replace the cone to make sure it is correctly placed on the stem. The bottom of the cone should be almost touching the bottom of the tower.
Recalibrate the fountain by unplugging it for 10 seconds and then plugging it back in. If the status light continues blinking red, please contact Customer Care for assistance.
Contact Customer Care
If you need further assistance, please contact our customer care team.